Wall Mounted Bathroom Cabinet

Wall Mounted Bathroom Cabinet | When repainting plaster surfaces, ceilings or walls that have recently been painted, the counter needs to be thoroughly washed as well as the cracks needs to be repaired before new paint is applied. To wash walls properly the work needs to be done through the baseboard up. Place a handful of washing soda inside a pail of domestic hot water. Using a sponge, wet a percentage of the wall, allowing water to soak looking for a short while. The addition of a bit paste to water helps to hold it to the counter.

With a clean sponge and domestic hot water, proceed to wash the walls down, changing water frequently. Allow all surfaces to dry thoroughly before painting. New interior trim, doors, window frames, etc., have decided for painting by smoothing all flat surfaces with No. 1 sandpaper. On curved surfaces and corners, No. 1 steel wool surpasses sandpaper, given it avoids uneven rubbing. The trim is then well dusted, and many types of knots are coated with orange shellac. If the wood contains much gum or resin, it needs to be specially treated.

After the shellac has dried well, the 1st coat of paint needs to be prepared and applied. When this first coat has dried, fill all holes and cracks with good quality putty, and allow it to dry every day and night. If you are using bathtub paint so that you can paint a vintage bathtub, you should probably get a bathtub replacement as opposed to filling all of the cracks with putty intended for interior walls. The putty can be prepared from paste white lead and whiting, adding enough whiting to create the putty stiff.

The next operation is usually to rub the trim down again with sandpaper and steel wool. Dust the trim again and apply the 2nd and third coats, always remembering the 1st rule of painting, which is to create sure that a surface is totally dry before applying paint. If interior woodwork is usually to be repainted, it should first be thoroughly washed with domestic hot water. When dry, it needs to be rubbed down with No. 0 sandpaper and steel wool, as directed for first time wood containing received the 1st coat of paint.


Leave a Reply

Your email address will not be published. Required fields are marked *