Ikea Bathroom Sink Cabinet

Ikea Bathroom Sink Cabinet | Ranges of freestanding, wood bathroom furniture, including those created by Mito, give a bathroom a look of top quality luxury that’s irresistible. With a selection of vanity units, washstands, and cabinets or self storage units to choose from, you’ll be able to combine individual pieces to produce a coordinated look that still floats freely within your bathroom.

As you’ll learn if you arrive at install your new purchases, however, freestanding doesn’t always mean ‘not fixed down’. Certain bathroom furniture is built to carry some kind of sanitaryware, and definately will therefore also house water supply pipes and waste pipes. A vanity unit or washstand, for instance, will hold a basin that will be plumbed into your mains water supply and sewage system. It needs to be fixed down in some manner, or any accidental knocks it receives will ultimately damage the pipework within – which, in return, could rapidly create a lot of problems for your bathroom.

Other items, including self storage units, don’t have to be fixed in place. This leaves you while using freedom to rearrange them normally as you please for the new bathroom look each time; it also implies that ‘installation’ becomes an invalid concept.

We’ll just deal here, then, with installing your new ‘freestanding’ wood vanity unit or washstand.

The initial thing you will have to do would be to look at where your water supply pipes and waste pipe enter your bathroom. They could come in through the wall, or up from your floor. Measure exactly where the pipes will be in regards to the places you plan to fix your vanity unit or washstand. Then appraise the vanity unit, and cut a dent either in the base or perhaps the back (whichever is pertinent for a pipe layout) allowing the vanity unit or washstand to slot over the pipes, so that your pipework is going to be concealed by your bathroom furniture. Take care when measuring: precision is vital to prevent errors.

Your vanity unit should then be fixed in place. Refer for a manufacturer’s fitting instructions, as specific guidance might have been included regarding how far better to do that. Generally, screwing the item to the wall or floor must be sufficient. Once again, be careful when measuring for your drill holes – both that you receive them inside the right place new, so you don’t hit any electric cables within your walls. Generally, electric cables in walls run inside a vertical line from your floor up to a plug socket and from your ceiling as a result of an easy switch, so avoid these areas. You could invest inside a sensor to alert you to the presence of wires in walls, which may be also a good choice for future DIY projects. Make sure you drill carefully, especially into tile because a surface that can crack easily if you drill too enthusiastically. There is going to be a little gap relating to the wall and also the back in the vanity unit; run some waterproof sealant along here to stop water ingress once your new bathroom is in use.

Leave a Reply

Your email address will not be published. Required fields are marked *